|
|
Introduction |
|
The Mototech MAM102 / MBR1022 is an up-to-date Broadband Access Solution for the Last mile Access over the existing coaxial cabling. It supports 270Mbps peak PHY rate for CPE, and delivers 1Gbps cumulative on single coax with 4 channels.
With the built-in High Speed Data Service over existing CATV (Cable Television), the Mototech MAM102 / MBR1022 allows Cable Operator and Broadband Service Provider over-lash fiber to passive coax. It features the MDU (Multiple Dwelling Units) application and provides a lower cost, no new wires, and higher performance alternative to FTTB+VDSL and FTTB+Ethernet.
|
|
Features
|
- Fully integrated c.LINK controller for coax-based access networks
- Automatic frequency scanning from 800MHz to 1500MHz
- Bandwidth management rate adaptation
- System upstream and downstream rate control
- Client node data rate limits and guarantees
- > 250Mbps coaxial interface
- Single 10/100BaseTX Ethernet interface on RJ-45 connector
- Operates as a c.LINK access network client device
- Central network management through network controller (NC) API and proprietary L2 messaging
- Coexistence with all broadband services and c.LINK networks
- Easily installed into the existing coax plant wiring
- Status LEDs (Power, Ethernet, c.LINK)
 |
|
Specifications
|
- RF Interface Connector:
- F-type, Female
- Impedance: 75O (norminal)
- Frequency Range: 800 ~ 1500 MHz
- Channel Bandwidth: 50 MHz
- Max Transmit Power: 0 dBm +/- 3dBm
- Max PHY Data Rate: > 250Mbps
- Coaxial Link Conditions
- Min Attenuation (> 250 Mbps PHY rate): 10 dB max
- Max Attenuation (> 250 Mbps PHY rate): 55 dB min
- Max Attenuation (> 57 Mbps PHY rate): 75 dB typical
- Data Rate of Coaxial Link
- >80Mbps FTP download speed with 31 installed CPEs
- Up to 130Mbps UDP (useful for general data and video delivery)
- Ethernet Application Data Rate: > 130 Mbps
- Straight coax cable
- 1518 byte packet size
- 0 ~ 55dB attenuation
- Ethernet Network Size: 64 Devices
- Ethernet Interface
- Connector Type: RJ45
- Configuration: Single Port, Auto-Sensing
- Protocol: IEEE 802.3x, 100M Fast Ethernet
- Link Delay: 5 ms
|
|
General
|
- Dimension (L* W* H): 104* 84* 26 mm
- Weight: 245g
- Operating Temperature: 0 °C – 50 °C
- Storage Temperature: -20 °C - 60 °C
- Operating Humidity: 0 - 95% (non-condensing)
- RF/Cable-In Interface: F-Connector, Female/75 ohm
- Power Consumption: 6V / DC IN
- LEDs: POWER, ACT, 100BT, COLL, LINK, D.L
- FR/Cable-In Interface: F-Connector, female, 75ohm
- Input Power (North America): 105-125 VAC, 60 Hz
- System Requirement: Minimum 486/66 (Pentium Processor preferred) or Macintosh-compatible CPU (Power PC) Operating systems such as: Windows® 95/98/2000/NT/Me/XP; Macintosh® OS 8 or higher; and UNIX®
|
|
